Directions
25
Directions
Warning
Always ride responsibly.
Always use navigation devices with
care.
Always program a navigation device
while the motorcycle is stationary and
in a safe place.
Never attempt to program a
navigation device while riding.
Navigation devices must be used as a
guidance only. Always look at your
surroundings and make responsible
decisions.
The My Triumph Connectivity Module
enables you to access directions from
the My Triumph App running on the
connected phone. Visible directions are
shown on the instruments and audible
directions are played through the
connected headset(s).
When in the Navigation tray, once a
manoeuvre is complete, the directions to
the next instruction are shown. If you
are not in the Navigation tray, the
navigation instruction is automatically
removed from the screen once the
direction has been passed. Alternatively,
joystick centre acknowledges the
displayed direction, and the instruments
will return to the previous display.
No map is displayed on either the
connected phone or the instruments.
Navigation-related notifications are
enabled and disabled through the
Notifications option (see page15).
Note
Programme your journey into the My
Triumph App on the connected phone
before setting off and stop in a safe
place if you later need to make changes.
Always obey traffic signs and signals,
they take precedence over
recommendations from navigation
systems; the My Triumph App does not
recognise or describe traffic lights or
road signs.
View turn-by-turn directions as
guidance only - look at your
surroundings and make sensible route
selections, ignoring directions from the
My Triumph App if necessary.
Always remember that traffic routing is
subject to change. Lanes, zones and
priorities may not be stored in the
navigation system and, even if they are,
they may not be up to date.
Reception problems may interrupt
navigation directions while you are
riding through tunnels or indoor car
parks, or in places surrounded by tall
buildings or trees.
The My Triumph App uses map data
stored in the cloud; you do not need to
update the data manually.