Assembly (Storage is the reverse of assembly)
Volleyball game instructions
STEP 3
-8-
DETAIL D
DETAIL C
With the help of another adult, slide poles with
the net into blue pivot connector at the same
time on both ends. See Detail C. Then, insert
hooks into the remaining hole in the net post as
shown in Detail D.
Congratulations! Assembly is complete. In this
configuration you can play Volleyball. To switch to
Badminton and Pickleball game modes see the
next page.
Net Hook
Tensioning the Volleyball net:
Attach Carabiners (#19) to the grommet on the net sleeve then attach guylines from the Stakes (#14) into
Carabiners. Insert each of the stakes (#14) into the ground at 45 degree angles from the end of the net.
Windy Conditions:
During windy conditions, insert metal ground stakes (#18) through the four holes on the base (#1) and into
the ground until firmly anchored.
Storage:
This multi sport game can be played outdoors but needs to be stored indoors. Store components into the
carry bag (#17) to avoid losing parts.
4
6
To Next Page
Loading...
