1399
Perform the following operations:
• Left Hand Control Plate - Installation
• Battery Box - Installation
• Battery - Installation
• Seat - Installation
Starter Motor – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Damage to painted surfaces could result from inadequate care during removal or
installation of the starter motor. Always protect the crankcase from damage during
removal or installation.
Perform the following operations:
• Seat - Removal
• Battery - Removal
The front upper fixing also secures the drive shaft cover.
Note the positions of the M6 x 20mm and M6 x 42mm fixings for installation.
To Next Page
Loading...
