Triumph Street Twin 2019 User Manual

Maintenance and Adjustment
134
Tire Pressure Monitoring System
(TPMS) (if equipped)
Caution
An adhesive label is installed to the
wheel rim to indicate the position of
the tire pressure sensor.
Care must be taken when replacing
the tires to prevent any damage to
the tire pressure sensors.
Always have your tires mounted
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
Caution
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor’s orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused by the use of
anti puncture fluid or incorrect
maintenance is not considered a
manufacturing defect and will not be
covered under warranty.
Always have your tires mounted
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
The tire pressures shown on your
instruments indicate the actual tire
pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tire pressures when
the tires are cold using an accurate
pressure gage. Do not use the tire
pressure display on the instruments.
Tire Wear
As the tire tread wears down, the tire
becomes more susceptible to punctures
and failure. It is estimated that 90%
of all tire problems occur during the
last 10% of tread life (90% worn). It is
recommended that tires are changed
before they are worn to their minimum
tread depth.

Triumph Street Twin 2019 Specifications

General

Displacement	900 cc
Transmission	5-speed
Frame	Tubular steel cradle
Seat Height	760 mm
Dry Weight	198 kg
Fuel Tank Capacity	12 liters
Compression Ratio	11.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Front Tyre	100/90-18
Rear Tyre	150/70 R17
Front Suspension Travel	120 mm
Rear Suspension Travel	120 mm
Rake	25.1°
Wet Weight	216 kg
Standard Warranty	2 years unlimited mileage
Engine Type	Liquid-cooled, 8-valve, SOHC, 270° crank angle parallel twin
Max Power	65 PS @ 7, 500 rpm
Max Torque	80 Nm @ 3, 800 rpm
Front Suspension	41mm telescopic fork
Rear Suspension	Twin shocks with adjustable preload
Front Brakes	Single 310mm disc, Nissin 2-piston floating caliper
Bore x Stroke	84.6 x 80 mm
Exhaust	2-into-2 exhaust system with twin silencers
Clutch	Wet, multi-plate
Swingarm	Twin sided, tubular steel
Front Wheel	18 x 2.5in
Rear Wheel	Cast aluminium alloy multi spoke, 17 x 4.25 in
Instrument Display and Functions	LCD multi-functional instrument pack with analogue speedometer
Length	2090 mm
Wheelbase	1, 415mm
Trail	102.4 mm