EasyManuals Logo

Triumph Street Twin 2019 User Manual

Triumph Street Twin 2019
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
Maintenance and Adjustment
142
Speed Twin, Thruxton and
Thruxton R
To install the battery:
Place the battery in the battery
case.
Secure with the battery strap and
make sure the USB port socket is
re-installed.
Reconnect the battery, positive lead
(identified with red tape) first.
Tighten the battery terminals to
40 lbf in (4.5 Nm).
Apply a light coat of grease to the
terminals to prevent corrosion.
Cover the positive terminal with the
protective cap.
Reinstall the seat (see page 72).
Fuses
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Note
A blown fuse is indicated when all of the
systems protected by that fuse become
inoperative. When checking for a blown
fuse, use the table to establish which
fuse has blown.
The fuse box is located underneath the
seat.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Twin 2019 and is the answer not in the manual?

Triumph Street Twin 2019 Specifications

General IconGeneral
Displacement900 cc
Transmission5-speed
FrameTubular steel cradle
Seat Height760 mm
Dry Weight198 kg
Fuel Tank Capacity12 liters
Compression Ratio11.0:1
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
Front Tyre100/90-18
Rear Tyre150/70 R17
Front Suspension Travel120 mm
Rear Suspension Travel120 mm
Rake25.1°
Wet Weight216 kg
Standard Warranty2 years unlimited mileage
Engine TypeLiquid-cooled, 8-valve, SOHC, 270° crank angle parallel twin
Max Power65 PS @ 7, 500 rpm
Max Torque80 Nm @ 3, 800 rpm
Front Suspension41mm telescopic fork
Rear SuspensionTwin shocks with adjustable preload
Front BrakesSingle 310mm disc, Nissin 2-piston floating caliper
Bore x Stroke84.6 x 80 mm
Exhaust2-into-2 exhaust system with twin silencers
ClutchWet, multi-plate
SwingarmTwin sided, tubular steel
Front Wheel18 x 2.5in
Rear WheelCast aluminium alloy multi spoke, 17 x 4.25 in
Instrument Display and FunctionsLCD multi-functional instrument pack with analogue speedometer
Length2090 mm
Wheelbase1, 415mm
Trail102.4 mm

Related product manuals