Triumph T509 Speed Triple User Manual

General Information
RUNNING-IN
The first 1000 miles
(1600km) that the motorcycle is
ridden is designated the ‘running-in’ period.
l The table below shows maximum recommended engine speeds during ‘running-in’.
l These maximum speeds must be strictly adhered to during this period.
Distance Travelled Maximum Engine Speed
O-100 miles (0-160km) 3500 rpm
(r/min)
100-300 miles (160-480km)
300-600 miles (480-960km)
5000 rpm (r/min)
6000 rpm (r/min)
t
600-800 miles (960-1280km)
I
7000 rpm (r/min)
800-l 000 miles (1280-l 600km)
I
8000 rpm (r/min)
I
Do not ride away or race the engine immediately after starting.
Run the engine at idle
for a short period of time to allow the oil to circulate to all parts of the engine.
Do not race the engine while the transmission is in neutral.
Do not use full throttle.
Avoid riding continuously at one speed, vary the speed of the motorcycle from time to
time.
Regularly check that the coolant temperature gauge does not indicate that the engine
is overheating. Stop immediately if overheating is indicated and allow the engine to
cool.
Do not allow the engine to ‘labour’ in any gear.
Page 24

Triumph T509 Speed Triple Specifications

General

Displacement	885 cc
Bore x Stroke	76 x 65 mm
Fuel System	Multipoint sequential electronic fuel injection
Transmission	6-speed
Front Brakes	Twin 320 mm discs, 4-piston calipers
Rear Brakes	Single 220 mm disc, 2-piston caliper
Ignition	Digital - inductive type
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Wheelbase	1, 430 mm
Engine Type	Liquid-cooled, DOHC, inline 3-cylinder
Front Suspension	43mm upside down forks, adjustable preload
Rear Suspension	Monoshock with adjustable preload
Fuel Capacity	18 liters
Final Drive	X ring chain