GENERAL INFORMATION
73
▼ Gently push the seat forward until
the rear locating lug locates into its
hole on the subframe.
5
2
3
1
1. Subframe
2. Front locating lugs
3. Front locating lug slots
4. Rear locating lug
5. Rear locating lug hole
▼ Secure the seat with its fastener
and tighten to 27 lbf in (3 Nm).
2
1
1. Passenger seat
2. Fastener
▼ Grasp the seat and make sure that
it is securely retained.
Universal Serial Bus (USB)
Socket
Warning
The USB socket is not waterproof
unless the waterproof cap is installed.
Do not connect electronic devices
while it is raining.
Water in the USB socket could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Caution
Do not leave the ignition switch in
the ON position unless the engine
is running as this will discharge the
battery.