General Information
28
Engine Management System
Malfunction Indicator Light
(MIL)
The Malfunction Indicator Light
(MIL) for the engine management
system illuminates when the ignition is
switched ON (to indicate that it is
working) but should not become
illuminated when the engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems controlled by the engine
management system. In such
circumstances, the engine management
system will switch to 'limp-home' mode
so that the journey may be completed, if
the fault is not so severe that the
engine will not run.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust emissions and fuel
consumption. Reduced engine
performance could cause a dangerous
riding condition, leading to loss of
control and an accident. Contact an
authorised Triumph dealer as soon as
possible to have the fault checked and
rectified.
Note:
• If the MIL flashes when the ignition
is switched ON contact an
authorised Triumph dealer as soon
as possible to have the situation
rectified. In these circumstances
the engine will not start.
High Coolant Temperature
Warning Light
With the engine running, if the
engine coolant temperature becomes
dangerously high, the high coolant
temperature warning light will
illuminate.
Caution
Stop the engine immediately if the high
coolant temperature warning light
illuminates. Do not restart the engine
until the fault has been rectified.
Severe engine damage will result from
running the engine when the high
coolant temperature warning light is
illuminated.
To Next Page
Loading...
Need help?
General
