Triumph Tiger XR - Activating Cruise Control

General Information
56
Activating Cruise Control
Note:
• The cruise control indicator light
will not illuminate until cruise
control has been activated by
pressing the SET/- adjust button.
To turn on the cruise control, press the
SET/- button. The cruise control symbol
is shown in the display screen. The
cruise control set speed is shown as ‘--’
indicating that a speed has not yet been
set.
RES /+
SET /-
ON
2
1
1. Cruise control adjust button, RES/+
2. Cruise control adjust button, SET/-
To activate cruise control, the following
conditions have to be met:
• The motorcycle is travelling at a
speed between 20 to 100 mph (32 to
160 km/h)
• The motorcycle is in 3
rd
gear or
higher
• The SET/- adjust button is pressed.
Once these conditions have been met,
press the SET/- button to activate
cruise control.
The word SET is shown below the cruise
control set symbol, the cruise control
set speed is shown and the cruise
control light illuminates in the
tachometer indicating that cruise
control is active.
3
1
2
1. Cruise control symbol
2. Cruise control set indicator
3. Cruise control set speed
TC
TC
1
1. Cruise control light