Trojan ENDURANCE - Parts List; Component Listing (Part 1)

7
PLEASE NOTE: Certain parts of your Endurance Rower are pre-assembled. The quantity of Hardware &
Tools on page 6 will be different to the quantity of parts on page 7 and 8.
PARTS LIST
No. Description Qty
1 Bolt (M8 x 42 x 15 S6) 2
2 Transportation Wheel 2
3 Washer (d8 x Ø16 x 1.5) 16
4 Nylon Nut (M8 x H7.5 x S13) 6
5 End Cap (Ø60.5 x 17) 4
6 Front Stabiliser 1
7 Nut (M8) 4
8 Adjustable Foot Pad (Ø52 x 18) 4
9 Bolt (M8 x 73 x 20) 2
10 Arc Washer (d8 x Ø20 x 2 x R30) 8
11 Spring Washer (d8) 14
12 Cap Nut (M8) 2
13 Bolt (M5 x 10) 4
14 End Cap 1
15 Console 1
15a, 15b Display Wires 2
16a, 16b Connection Wires 2
17 Handlebar Holder 1
18 Bolt (M5 × 10 × Ø8.5) 2
19 Foam Grip 2
20 End Cap (Ø32 x 17) 2
21 Handlebar 1
22 Pedal Bolt 1
23
Washer (d8 x Ø20 x 2)
3
24 Bolt (M8 x 20 x S5 x Ø13) 11
25 Screw (ST4.2 x 16 x Ø8) 20
26L, 26R Cover 1
No. Description Qty
27 Main Frame 1
28 Bolt (M12 × 160) 2
29 Pedal 2
30 Pedal Strap 2
31 Bolt (M4 x 12) 4
32 Aluminium Rail 2
33 Steel Rail 1
34 Limited Block 4
35 Bolt (M6 x 16 x Ø10) 4
36 Top Cover of the rail 1
37 Bottom Cover of the rail 1
38 Rear Stabiliser 1
39 Bolt (M8 x 16 x S14) 4
40 Saddle 1
41 U Bafe Plate 2
42 Left Support Plate of Saddle 2
43 Bolt (M8 x 135 x 15 x S14) 3
44 Chain Bolt (M6 x 40 x Ø10 x 2.5) 4
45 Chain U Saddle 4
46 Nylon Nut (M6 x H6 x S10) 5
47 Spacer (d8 x Ø15 x 4) 6
48 Bearing (608 Z) 10
49 Roller (Ø45 x 38 x Ø22) 4
50 Spacer (Ø14 x Ø8.3 x 30) 2
51 Roller (Ø33 x 106 x Ø22) 1
52 Nut (M10 x 1 x H9.5 x S15) 4
53 Nut (M10 x 1 x H5 x S17) 4
#20M01T011 ENDURANCE ROWER UM.indd 7#20M01T011 ENDURANCE ROWER UM.indd 7 2020/07/01 16:042020/07/01 16:04