Trojan GLIDE CYCLE 220 - Trojan Glide Cycle 220 Maintenance and Troubleshooting; Cleaning Instructions; Troubleshooting Common Issues

19
10317
PROBLEM SOLUTION
There is no display on the
computer console.
1. Remove the computer console and verify the wire that
comes from the computer console is properly connected
to the wire that comes from the main frame.
2. Check if the batteries are correctly positioned and that
the battery springs are in proper contact with batteries.
3. The batteries in the computer console may be dead.
Change to new batteries.
Squeaking noise when in use. There may be a loose bolt, please inspect the bolts and
tighten if necessary.
#14M01T003 GLIDE 220 Elliptical UM OL.indd 19 2014/01/16 3:07 PM
All manuals and user guides at all-guides.com