Need help?Do you have a question about the Trojan PULSE 260 and is the answer not in the manual?
Consult physician before exercise. Stop if unwell. Warm-up and cool-down recommended.
Set up on a level, stable surface. Ensure adequate ventilation and clearance space around the equipment.
Use equipment as intended. Avoid injury by proper use. Operate one person at a time and maintain balance.
Check for damage before use. Use genuine parts. Ensure all bolts are tight and labels are intact.
Maximum user weight is 130 kg. Do not exceed this limit for safe operation.
Attach front and rear stabilisers to the main frame using specified bolts, washers, and nuts.
Connect mid-sensor and tension wires. Slide upright post onto the main frame and secure it.
Insert swing rod posts into the upright post and secure them with bolts, washers, and caps.
Attach pedal rod posts and swing rod posts to the crank axis and secure with nuts, washers, and caps.
Attach pedals to pedal rod posts and handlebars to swing rod posts using bolts, nuts, and washers.
Attach the mid-handlebar post to the upright post and connect the console using screws and wires.
Work within the target heart rate zone to build muscle and improve fitness. Maintain a steady tempo.
Check console wire connections, battery placement, and battery charge for display issues.
Inspect and tighten any loose bolts or screws if the equipment makes squeaking noises.
Maintain heart rate between 65-85% of maximum for effective aerobic exercise and fat burning.
Consult physician before exercise. Stop if unwell. Warm-up and cool-down recommended.
Set up on a level, stable surface. Ensure adequate ventilation and clearance space around the equipment.
Use equipment as intended. Avoid injury by proper use. Operate one person at a time and maintain balance.
Check for damage before use. Use genuine parts. Ensure all bolts are tight and labels are intact.
Maximum user weight is 130 kg. Do not exceed this limit for safe operation.
Attach front and rear stabilisers to the main frame using specified bolts, washers, and nuts.
Connect mid-sensor and tension wires. Slide upright post onto the main frame and secure it.
Insert swing rod posts into the upright post and secure them with bolts, washers, and caps.
Attach pedal rod posts and swing rod posts to the crank axis and secure with nuts, washers, and caps.
Attach pedals to pedal rod posts and handlebars to swing rod posts using bolts, nuts, and washers.
Attach the mid-handlebar post to the upright post and connect the console using screws and wires.
Work within the target heart rate zone to build muscle and improve fitness. Maintain a steady tempo.
Check console wire connections, battery placement, and battery charge for display issues.
Inspect and tighten any loose bolts or screws if the equipment makes squeaking noises.
Maintain heart rate between 65-85% of maximum for effective aerobic exercise and fat burning.
General| Brand | Trojan |
|---|---|
| Model | PULSE 260 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page