Trojan PULSE 260 - STEP 5: HANDLEBAR ASSEMBLY

15
STEP 5: HANDLEBAR ASSEMBLY
Attach the Pedal (36 L, 36 R) on each Pedal Rod Post (20 L, 20 R) with a Bolt (M8 x 45 mm) (35), a Nylon Nut (M8) (21)
and a Washer (Ø8 x Ø16 x 1.5 mm) (18).
Insert the Handlebar (9 R, 9 L) onto each Swing Rod Post (16 R, 16 R) with a Square Neck Bolt (M8 x 43 mm) (10). Curved
Washer (Ø8 x Ø16 x R16 x 1.5 mm) (27) and a Cap Nut (M8) (28).
ASSEMBLY STEPS
STEP 5