To Next PageTo Next Page
Need help?Do you have a question about the Trojan IMAGE 350 and is the answer not in the manual?
Consult a physician before starting any exercise program, especially if over 35, inactive, pregnant, or ill.
Set up on a solid, level surface away from moisture, with adequate ventilation and space.
Use only as intended, avoid injury, use one person at a time, maintain balance, do not adjust while using.
Instruct users on proper procedures. Supervise children. Wear proper footwear. Avoid loose clothing or jewelry.
This TROJAN IMAGE 350 may not be used by persons weighing more than 110kg.
Keep cords away from heat. Never use if frayed or wet. Ensure proper grounding and do not modify plugs.
Attach Transportation Wheels and End Caps to the Main Frame stabilizers using screws and adjustable knobs.
Prepare the Main Frame mounting post, pull upper cable through the front post, and secure the front post.
Attach Upper Swing Bars to Lower Handlebars using nuts and hex head bolts.
Prepare the Front Post axle, attach swing bars, and secure with bolts and screws.
Attach the pedals to the pedal arms using bolts and spring washers.
Apply grease to pedal tube axle, insert into handlebar and pedal tube, and secure with axle cover and screw.
Consult a physician before starting any exercise program, especially if over 35, inactive, pregnant, or ill.
Set up on a solid, level surface away from moisture, with adequate ventilation and space.
Use only as intended, avoid injury, use one person at a time, maintain balance, do not adjust while using.
Instruct users on proper procedures. Supervise children. Wear proper footwear. Avoid loose clothing or jewelry.
This TROJAN IMAGE 350 may not be used by persons weighing more than 110kg.
Keep cords away from heat. Never use if frayed or wet. Ensure proper grounding and do not modify plugs.
Attach Transportation Wheels and End Caps to the Main Frame stabilizers using screws and adjustable knobs.
Prepare the Main Frame mounting post, pull upper cable through the front post, and secure the front post.
Attach Upper Swing Bars to Lower Handlebars using nuts and hex head bolts.
Prepare the Front Post axle, attach swing bars, and secure with bolts and screws.
Attach the pedals to the pedal arms using bolts and spring washers.
Apply grease to pedal tube axle, insert into handlebar and pedal tube, and secure with axle cover and screw.
General| Stride Length | 18 inches |
|---|---|
| Resistance Levels | 16 |
| Display Type | LCD |
| Programs | 12 |
| Resistance Type | Magnetic |
| Flywheel Weight | 18 lbs |
| Display Features | Time, Speed, Distance, Calories, Pulse |
| Heart Rate Monitoring | Hand Grip Sensors |
