Trojan POWER RACK 400 - STEP 9

STEP 9
• AttachoneendoftheButteryCable(51)totheLeftButteryArm(8)usingone3/8”x1”HexBolt(55),one
 3/8”Washer(64)andone3/8”Locknut(67).
• MakesuretheButteryCable(51)isinthegrooveofPulley(32);installPulleyAintotheTurnPulleyBracket(25)
 usingone3/8”x2”HexBolt(56),two3/8”Washers(64)andone3/8”Locknut(67).
• InstallPulleyBintotheSinglePulleyBracket(26)usingone3/8”x2”HexBolt(56),two3/8”Washers(64)andone
 3/8”Locknut(67).
• InstallPulleyCintotheTurnPulleyBracket(25)usingone3/8”x2”HexBolt(56),two3/8”Washers(64)andone
 3/8”Locknut(67).
• AttachtheotherendoftheButteryCable(51)totheRightButteryArm(7)usingone3/8”x1”HexBolt(55),
 one3/8”Washer(64)andone3/8”Locknut(67).
10148-14
4. ASSEMBLY STEPS - CAGE