2 ) Use the UP and Down button to select the optional item. Press ENTER
button, the digits will be flashing, then press UP or DOWN button for change.
Finally, press ENTER button to confirm and save change.
Wattage : Select the wattage of ballast that will be connected to this line.
Output Max : Select the wattage that you would like to operate the fixtures in
increment of 25 watts. User can select any setting between 600 watts and 1150
watts for the 1000 watt fixture.
On at : The time of day that the lights for that LINE 1 will be turned ON.
Off at : The time of day that the lights for that LINE 1 will be turned OFF.
To Next Page
Loading...
