2 ). When the Device 1 is selected, user can set the humidity setpoint for Day /
Night mode for the Device 1. The unit will automatically turn ON the Humid
Device 1 when the measured humidity is ABOVE or BELOW the setpoint. Press
ENTER button and the Above or Below text will be flashing. Press UP or DOWN
button to change between Above and Below. Finally, press ENTER button to
confirm and save the change. The LCD screen will display " Setting saved "
For example : Turn on device when humidity level Above setpoint for
Dehumidifier; Turn on device when humidity level Below setpoint for Humidifier.
Use UP and DOWN button to select Day mode or Night mode, the selected item
will be flashing. Press UP or DOWN button to change the setpoint. Finally, press
To Next Page
Loading...
