system can control up to 40 traditional ballasts on each line, 80 traditional
ballasts in total on both lines.
Various devices (such as for Temp / Humid / CO2, etc.) can be connected to
this unit through 4 types of different Device Stations. Each device has its own
and dedicated device station, which can be purchased separately depending
your needs. Don't mix up device station for different device.
Sensors, Device Stations and Ballasts are connected to main controller by
using RJ12 cables to daisy-chain all the devices together. Each of the sensors
and devices stations comes with an RJ12 "T" splitter and RJ12 cables.Various
length pre-crimped RJ12 cables and additional T-shape splitters can be
purchased separately.
A maximum distance of 1000ft / 300 meters between the HCS-1 Hydro-X
Control System and the devices to be controlled.
Follow all local and national electrical codes for installation requirements.
The Hydro-X is designed for indoor use only. It is recommended to use our
Trolmaster's accessories for good performance.
COMPONENTS
To Next Page
Loading...
