TRONFY TP60+ PROJECTOR
11
Besides, here are the tips to reduce the noise
1. Please use the projector in room temperature or low temperature, so the projector will heat
slowly, and then the noise will be reduced.
2. Please use projector in the clean environment and seal it after using to get away from the dust.
3. If you use the projector about 3-6 months, the noise of projector will be louder, you can try to
take apart it to clean the dust on the fan.
Over Temperature Protection:
If the temperature inside the projector rises too high, the over temperature projector will
automatically turn off the lamp with the STATUS indicator blinking.
Should this happen, do the following:
* Unplug the power cable after the cooling fans stop.
* Clean the ventilation holes if they are clogged with dust.
* Wait about 60 minutes until the inside of the projector becomes cool enough.
Dolby
NOTICE: Due to the copyright issue of Dolby, this projector does not support Dolby's Audio
decoding【Close the Dolby option of the device you connected】
Could the projector support the power point presentations?
It supports PPT format, but please be aware that this projector is a simple projection equipment.
It can support all files you have in your Computer/Laptop device. But it doesn’t have any
intelligent functions, such as read the office software in the U disk directly. (If you need this
function, please search for SMART android projector)
How can I get a better movie experience?
It is important to note that projectors in this price range, you need to have the room/ area you
are viewing this projector as dark as possible. Overhead lights and especially sunlight will easily
drown the light produced by this LED and will make the image quality suffer or make it impossible
to actually see the image. This projector is not meant for daytime viewing or viewing with the
lights on. In one word, the image quality would be actually fantastic while in darkness! Not
recommended for PPT or business presentation, ideal for home theater movies and video game
use.
No image and sound / Shuts off automatically
Take off the power supply for a second and restart the projector, Ensure the signal input
To Next Page
Loading...