TRONFY TP60+ PROJECTOR
3
Description of The Projector’s Interface
SD Card Interface
USB 2.0 Slot:
Projector is only a device for projecting images. The USB port is only for U-Disk/Hard Disk Device
connecting, Not support reads the data from iPhone/iPad/Android Smartphones.
Out 5V Interface:
5V-Output USB for Mobile Tablet power supply. This means the usb output is only for power
supply.（NOT FOR iphone, iPad charging.）
HDMI Input Interface:
HD decoding: Support 1080P HD decoding, whether HD video, pictures, music, movie, e-books
can be played.
VGA Interface:
If you connect the projector with VGA Interface, there is a picture but no sound. Unless using a
VGA cable with audio.
The Signal Source of Remote Control:
Remote Control must be aligned to The Signal Source, which can control the projector.
Headphone jack:
To Next Page
Loading...