Tronic TPB 10000 A1 User Manual

TPB 10000 A1
■ 14
│
GB
│
IE
Charging via USB-C port 3
♦ If your mobile device is equipped with USB
Power Delivery 3.0, you can use a USB-C
to USB-C cable (not included) to connect
the USB-C input of your device to the USB-C
port 3 of the power bank for faster charg-
ing. Charging starts automatically as soon
as the connection is made.
♦ If charging does not start automatically,
press the ON/OFF button 5 once briefly to
start the charging process.
♦ During the charging process, the charge
level LEDs 4 show the current charge level
of the power bank (see table in the section
Checking the charge level).
♦ To stop charging, disconnect the charging
cable from the mobile device and the power
bank. The charging status LEDs 4 go out
after about 35 seconds.
♦ Optionally, you can press the ON/OFF
button 5 twice in quick succession to turn
off the power bank and the battery level
LEDs 4.

Tronic TPB 10000 A1 Specifications

General

Brand	Tronic
Model	TPB 10000 A1
Category	Accessories
Language	English