TPB 10000 A1
GB
│
IE
│
13 ■
Handling and use
Charging mobile devices with the
power bank
NOTE
► You can charge up to two devices at a
time using the power bank. If both outputs
(USB-A 2 and USB-C 3) are used
simultaneously, the output voltage for both
ports is set to 5 V. Fast charging is then no
longer possible. The total power consump-
tion of the connected mobile devices must
not exceed 3 A.
► If the USB-A socket 2 is in fast charging
mode and the USB-C socket 3 is connected
to another device for charging, fast charging
is terminated and normal charging is acti-
vated. All connected devices are now
charged at 5 V.
Charging via USB-A port 2
♦ Connect the supplied charging cable 6 or
the original charging cable of the device you
want to charge to the USB-A port 2.
♦ Then connect the device you want to charge
to the power bank 1. The charging process
begins automatically.
♦ If charging does not start automatically,
press the ON/OFF button 5 once briefly to
start the charging process.
To Next Page
Loading...
Need help?
General
