EN 4
Operating manual – local air conditioner PAC 2010 E / PAC 2610 E
Information about the device
Device description
The device serves the purpose of cooling the room air. It further
filters and dehumidifies the air thus creating an agreeable room
climate.
The unit cools the room air by withdrawing warmth. The
absorbed warmth is emitted to the outside via the exhaust air
hose; cooled air is fed to the installation site by means of a fan.
Accumulating condensate drips from the evaporator onto the hot
condenser, there it evaporates and then is transported to the
outside via the exhaust air hose.
In ventilation mode the device provides the opportunity of air
circulation without cooling effect.
In dehumidification mode moisture is withdrawn from the air.
The device comes with a self-cleaning function for internal
drying to prevent mould formation or the likes due to residual
moisture on the inside of the device.
The device operates fully automatically and features a variety of
further options. The device can, for instance, be switched on or
off automatically with time delay via the timer function.
Operation of the device is possible either via the control panel at
the device or via the supplied infrared remote control.
The device was designed for universal and flexible application.
Due to its compact dimensions it can be easily transported and
used in all interior spaces.
Device depiction
T-ON T-OFF
COOL
DRY
FAN
X-FAN
SLEEP
LOCK
SPEED
No. Designation
1 Control panel
2 Air outlet with ventilation flaps
3 Wheels
4 Air inlet with air filter
5 Exhaust air hose connection
6 Remote control
7 Condensate outlet with rubber cap
8 Power cable holder
9 Hose connector with sealing cap and rubber stopper
10 Handle
11 Compartment for remote control
To Next Page
Loading...
