Trotec PAC 2010 E - Air Management and Operation; Air Filter and Exhaust Hose Setup

EN 8
Operating manual – local air conditioner PAC 2010 E / PAC 2610 E
Inserting the air filter
Notice
Do not operate the device without an inserted air filter!
Without an air filter the inside of the device will be
heavily contaminated, which could reduce the
dehumidification performance and result in damage to
the device.
• Make sure that both air filters are installed before
switching the device on.
A.
B.
C.
D.
Connecting the exhaust air hose
1. Assemble the two-part flat nozzle by pushing the top
connection piece onto the bottom one until they click into
place.
2. Screw the flat nozzle onto one end of the exhaust air hose
in the direction of the arrow.
3. Screw the hose adapter onto the other end of the exhaust
air hose in the direction of the arrow.
4. Insert the hose adapter with exhaust air hose into the air
conditioner's exhaust air hose connection. The side labelled
TOP must face upwards.