EN 8
Operating manual – air cooler PAE 25
In air freshening mode, the fan speed increases and decreases
alternately to generate a pleasant, natural flow of air.
Please proceed as follows to activate air freshening:
1. Press the Mode button(25) until the air freshening
symbol(14) appears on the display.
When switching the device on, it starts in ventilation mode at
stage 1. All 4 speed stages can be selected manually.
Setting the timer
The timer has two modes of operation:
• automatic switch-on upon expiry of a preset number of
hours.
• automatic switch-off upon expiry of a preset number of
hours.
The number of hours can be between 1 and 15 and can be
adjusted in increments of 1h.
Automatic switch-on
1. Switch off the device.
2. Press the Timer / Preset button(26) until the desired
number of hours is displayed as a combination of the
different hour symbols(24).
ð The Preset symbol(16) appears on the display.
ð The timer setting equals the desired number of hours.
ð After the set number of hours has elapsed, the device
automatically starts running in ventilation mode at fan stage
1. Additionally, automatic switch-off is programmed to 2
hours and the swing function is switched on.
Notes regarding automatic switch-on:
• Manually switching the device on disables the automatic
switch-on function.
• If the power supply is interrupted, the timer will be
deactivated.
Automatic switch-off
ü The device is switched on.
1. Press the Timer / Preset button(26) until the desired
number of hours is displayed as a combination of the
different hour symbols(24).
ð The Timer symbol(18) appears on the display.
ð The timer setting equals the desired number of hours.
ð The device switches off after the set number of hours has
elapsed.
Activating night mode
In night mode, it is possible to additionally switch on air cooling.
Air freshening cannot be activated.
1. Press the Mode button(25) until the night mode symbol(15)
appears on the display.
Info
If you activate air cooling, an alarm signal will be
emitted when the water tank is empty, even in night
mode.
Setting the fan stage
1. Press the Speed button(23) until the desired fan stage
appears on the fan stage indicator(17) on the display.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
Timer/
Preset
Speed
Wind
Direction
Mode
ON/OFF
Cooling
Light
No. Designation Meaning
21 ON/OFF button Switching the device on or off
22 Wind Direction button Switching the swing function on
or off
23 Speed button Setting the fan speed
25 Mode button Selection button for operating
mode air freshening or night mode
26 Timer / Preset button Switching the timer on or off
27 Cooling button Switching the air cooling mode on
or off
28 Light button Switching the display illumination
on or off
29 Remote control
transmitter/receiver
For infrared transmission to the
device
To Next Page
Loading...
Need help?
General
