Operating manual – Electric heater TEH 20 T / 30 T
3 EN
7. Use
Proper use
The electric heaters TEH 20 T and 30 T have been developed for hot air
generation and ventilation and can be used inside and outside (under dry
conditions). It can be applied for drying, de-icing, heating and ventilation.
The device can bee used for heating rooms such as cowsheds,
greenhouses or winter construction sites and for de-icing machines or
pipelines.
Any application deviating from the above-mentioned use is deemed
inadmissible!
8. Installation conditions
When choosing the installation location of the electric heater, a
number of spatial and technical conditions must be taken into account.
Any non-compliance may impair the functionality of the device and/or of
its accessories or result in hazardous situations for persons and property.
The following points are to be observed during installation:
• The device must be installed in a stable position and placed on
afireproof, horizontal, even and vibration-free surface.
• The installation location must be dry. It must be ensured that
no humidity (e. g. spray water, rain or snow) can penetrate the
device. If humidity gets inside the electric heater nevertheless,
disconnect the device from the power supply and have it checked
by a certified specialist workshop.
• The device must be connected to a properly protected socket
complying with all parameter requirements (refer to "Technical
data").
• The electric heater must not be operated in extremely dusty
environments.
• The minimum distance of the device to inflammable materials
must be at least 2 m.
• The minimum distance to walls must be at least 50 cm.
• Air humidity at the installation location must not condense on
the device.
• Intake and exhaust openings must not be covered.
9. Description of device
The electric heater TEH 20 T or 30 T includes the following components:
Device overview
1
2
3
4
5
6
7
8
9
10
1 Exhaust opening 6 Turn control
2 Housing 7 Indicator lamp
3 Handle 8 Power switch
4 Intake opening 9 Power connection
5 Fan 10 Feet
To Next Page
Loading...
Need help?
General
