Operating manual – Electric heater TEH 20 T / 30 T
EN 2
5. Function and product characteristics
TEH 20T and 30T devices are mobile, electrically operated air heaters.
They are used for air heating to heat rooms and speed up drying or de-
icing processes. The device can be used both inside and outside.
Thanks to the high fan power, large rooms can also be heated within
ashort period of time.
The integrated thermostat enables continuous temperature configuration
and ensures constant room temperatures.
The device is designed for operation under difficult conditions and can
also be operated at construction sites (heating and construction drying),
in greenhouses or other commercial fields e. g. for drying pottery.
The heater is designed for permanent operation.
Functional principle
Air to be heated is sucked in by the axial fan and fed through the interior
of the device. There, it passes a heating coil, is heated and released into
the room through the exhaust opening (refer to "Description of device")
6. Technical data
TEH 20 T TEH 30 T
Parameter Value Value
Article number 1.410.000.203 1.410.000.205
EAN code 4052138007419 4052138007068
Heating capacity 2.5 kW 3.3 kW
Heating capacity 2150 kcal 2837 kcal
Air volume 185 m
3
/h
185 m
3
/h
Temperature increase ΔT 56 °C 75 °C
Power consumption 10.9 A 13.4 A
Power connection 16 A (Schuko) 16 A (Schuko)
Connection voltage 230 V 230 V
Frequency 50 Hz 50 Hz
Thermostat yes yes
Mobility portable portable
Noise level 63 dB (A) 63 dB (A)
Depth 325 mm 325 mm
Width 260 mm 260 mm
Height 330 mm 330 mm
Weight 9.7 kg 9.7 kg
Tube connection 155 mm 155 mm
4. General safety instructions
Please observe the following safety instructions!
Any non-compliance with these instructions may
have serious consequences for the health of
persons and could result in property damage and
damage to the environment.
Risk of explosion!
• Do not operate the device in potentially flammable or explosive
environments. Do not install it in such environments, either.
• Do not place the device on a flammable surface.
• Remove any inflammable materials and chemicals from the
immediate operating environment.
Functional impairment of and damage to the device!
• Install the device in a stable position.
• Keep the intake and exhaust openings free.
• Do not cover the device during operation.
• Only disconnect the device from the mains once it has cooled
down completely.
• Do not use any chemicals when cleaning the device.
• Never place items on the heater or step on it.
Risk of injury and damage to property due to defective devices!
• Before each use of the device, check its accessories and connec-
tion parts for possible damages. Do not use any defective devices
or device parts.
• Do not use the device if you detect any damage to its plug and
cables. Defective power cables represent a serious health threat.
Danger to life through electrical shock!
• Only connect the device to power sources that are in good tech-
nical order. Do not use damaged wall outlets!
• Pull the connection cable out of the wall outlet by pulling it at
its plug.
• Do not touch electrical connection cables when your hands are
wet!
• Protect the electrical connection cables against damage caused
by, for example, animals.
• Do not carry out any changes or repairs on the device!
• Do not expose the device to any liquids.
• Do not apply any liquids to the interior of the device. If this does
happen nevertheless, pull out the power cord and have the
device checked by a specialist workshop.
Risk of injury!
• The device must only be operated by authorised and appropri-
ately trained personnel.
• Do not insert any objects into the intake and exhaust opening of
the device.
• Do not reach into the existing openings.
• Do not leave children or animals unattended near the operating
device!
To Next Page
Loading...
