Troxler NTO 6–15
6. CALIBRATION
VERIFY
The oven enables the operator to verify the accuracy of the
integrated scale using a known mass. To verify the scale, press 〈3〉
at the Scale Menu. Ensure that the oven chamber is at room
temperature, the hearth plate is in place on the rails, and the
chamber door remains open throughout the process. Ensure that the
hearth plate does not touch the chamber sides.
NOTE
The oven chamber must be at room temperature (less
than 35 °C), the hearth plate must be in place, and the
chamber door must remain open to properly verify the
scale.
The oven automatically tares the scale, then requests the mass being
used to verify the scale:
Enter Mass
value (3000-9000g)
then press ENTER
Enter the mass in grams, and press 〈ENTER〉. The oven displays:
Place mass on
scale, then press
enter - system will
delay 60 seconds
Place the mass on the hearth plate, then press 〈ENTER〉.
To Next Page
Loading...
Need help?
General
