Troxler NTO 5–33
5. MAIN MENU
SYSTEM OUTPUT
The oven features a System Information function that outputs the
following data to the serial communications port every second. The
data is output in the order shown. The operator can elect to enable
this function anytime the oven is powered on (Always On) or only
during a burn cycle (During Burn Only).
♦ Current time
♦ Current chamber temperature in degrees Celsius or Fahrenheit,
as selected by the operator
♦ Total mass on the scale
♦ Elapsed time in seconds of a burn cycle (applies only during a
burn cycle)
♦ Current mass loss in grams (applies only during a burn cycle)
♦ Current percentage mass loss (applies only during a burn cycle,
takes into account the current calculation type setting)
♦ Current corrected %AC (applies only during a burn cycle)
To enable or disable the System Information function, press 〈5〉 on
the Miscellaneous Menu. The oven displays:
System Info Output
1. Always On
2. During Burn Only
3. Off
Press 〈1〉 to turn the System Information function always on; 〈2〉 to
enable the function only during a burn; or 〈3〉 to disable it. The oven
displays a brief confirmation message and returns to the
Miscellaneous Menu.
To Next Page
Loading...