Troxler NTO series - User Manual

Manual of Operation and Instruction
Troxler NTO
Asphalt Content
Ignition Oven
Troxler Electronic Laboratories, Inc.
3008 Cornwallis Road • P.O. Box 12057
Research Triangle Park, NC 27709
Phone: 1.877.TROXLER
Outside the U.S.A.: +1.919.549.8661
Fax: +1.919.549.0761
www.troxlerlabs.com

Troxler NTO series Specifications

General

Model	NTO Series
Display	LCD
Measurement Principle	Nuclear
Accuracy - Moisture	±0.01 g/cm³
Power Supply	Rechargeable battery
Operating Temperature	-10°C to 50°C
Safety Standards	ANSI
Category	Nuclear Gauge
Storage Temperature	-40°F to 176°F (-40°C to 80°C)

Summary

CHAPTER 1. INTRODUCTION TO THE TROXLER NTO

CHAPTER 2. PRODUCT SAFETY INFORMATION

Cautions and Warnings

Highlights critical safety cautions and warnings related to oven operation and hazards.

Safety Warnings

CHAPTER 3 INSTALLATION

Site Selection

Oven Installation

Step-by-step instructions for physically installing the Troxler NTO oven.

CHAPTER 4 SETUP AND OPERATION

First-Time Startup and Setup

Guides the user through the initial setup and startup procedures for the oven.

Daily Startup and Operation

Provides procedures for powering on and operating the oven on a daily basis.

CHAPTER 5 MAIN MENU

Oven Main Menu

Burn Setup Menu

Details options for configuring burn parameters, modes, and profiles.

Auto-Timer

CHAPTER 6 CALIBRATION

Correcting %AC Measurements

Explains how to compensate for mass loss effects using aggregate correction factors.

Correction Menu

Guides on managing aggregate correction factors (ACFs) within the oven.

Scale Menu

Provides procedures for taring, verifying, and calibrating the oven's integrated scale.

CHAPTER 7 HANDLING DATA

Project Menu

APPENDIX A MAINTENANCE AND SERVICE

Troubleshooting

Provides solutions for common oven problems and error messages.