5–34
ABORT PRINT
The Abort Print function enables the operator to halt a print
operation. To access the Abort Print function, press 〈6〉 on the
Miscellaneous Menu. The oven displays:
Aborting print...
Upon completion, the oven returns to the Miscellaneous Menu.
UNLOCK DOOR
The Unlock Door function allows the operator to unlock the
chamber door if the sample burn time is less than 30 minutes or
under any other condition from the default screen. To unlock the
door, press 〈7〉 on the Miscellaneous Menu. The oven briefly
displays the following message, then returns to the Miscellaneous
Menu.
Door Unlocked
-USE CAUTION-
safety conditions
may not be met
WARNING
To prevent personal injury, do not unlock the door
during a burn.
CLEAN OVEN
Refer to the Cleaning section in Appendix A for information on the
Clean Oven function.
To Next Page
Loading...
Need help?
General
