Troxler NTO 7–7
7. HANDLING DATA
ERASE
The Erase function allows the operator to erase a selected project or
all projects. To access the Erase function, press 〈4〉 at the Project
Menu. The oven displays:
Erase
1. One Project
2. All Projects
To erase all project files, press 〈2〉 and follow the prompts. To erase
a single project file, press 〈1〉. The oven displays:
Select
1. Scroll Projects
2. Enter Project ID
Press 〈1〉 to scroll through the stored projects, or 〈2〉 to enter a
known project ID. Follow the same procedures as described in the
Select section on page 7–3 to select or enter the ID of the project to
be erased.
The oven dis
play
s:
Erase Project
PROJECT ID
Are you sure?
f To erase the displayed project, press 〈YES〉. The oven erases
the project, displays a brief confirmation message, and returns
to the Project Menu.
f To return to the Project Menu without erasing the project,
press 〈NO〉 or 〈ESC〉.
To Next Page
Loading...
Need help?
General
