5–10
To select the desired burn profile, press 〈5〉 at the Burn Parameter
Menu shown on page 5–4. The oven displays:
Profile (default)
Use arrows to scroll
Use Enter to select
Use the arrow keys to scroll through the profiles. When the desired
profile is displayed, press 〈ENTER〉. The oven sets the profile,
briefly displays the selected profile, and returns to the Burn
Parameter Menu.
AUTO-PRINT
The Auto-Print function automatically prints sample data during a
burn cycle. The oven offers two Auto-Print printout options:
standard and reduced. A standard printout includes minute-by-
minute burn data. A reduced printout (see Figure 5–1) includes only
a header and footer and a summary
of the burn data.
To set up the Auto-Print function, press 〈2〉 at the Burn Setup
Menu. The oven displays:
Auto-Print
1. On
2. Off
f To return to the Burn Setup Menu without changing the
Auto-Print status, press 〈ESC〉.
f To turn the Auto-Print function on, press 〈1〉. The oven
displays:
do you want to
output in
REDUCED format?
To Next Page
Loading...
Need help?
General
