Troxler NTO 1–9
1. INTRODUCTION
UNPACKING AND INSPECTING
NOTE
To ensure the safe return of the oven to Troxler for
repair or maintenance, please keep the original shipping
box, pallet, and all packing materials. The box folds for
easy storage.
Upon receiving the oven from the factory:
1. Perform a complete inspection and inventory. If the shipping
case and/or any other part or accessory appears damaged, notify
the carrier and your Troxler representative immediately.
2. Cut the nylon bands from around the carton, then lift off the top
half of the box, and remove all accessory items.
3. Remove any packing material packed around the oven or inside
the oven chamber. Save all packing material, including the
plastic sheet used to cushion the inside of the chamber door
during shipping, for reuse if the oven needs to be returned for
service or repair. The box folds for easy storage.
4. Remove the bottom half of the box.
To Next Page
Loading...
Need help?
General
