Troxler NTO 5–25
5. MAIN MENU
ACTIVE PROJECT SELECTED
If the operator initiates the Store function, there is sample data to be
stored, and a project has been selected as active, the oven displays:
Input new sample
number
then press ENTER
Enter a sample number (up to six numerals). Troxler recommends
that manually stored samples be numbered beginning at 100 or
higher. When the sample number is complete, press 〈ENTER〉.
If there is sufficient memory, the oven stores the sample data under
the active project ID and sample number entered, briefly displays a
confirmation message, then returns to the previous screen.
If there is insufficient memory to store the data, the oven displays an
error message and returns to the previous screen. One or more
projects must be deleted before the new project data can be stored.
NO PROJECT DATA
If the operator initiates the Store function and there is sample data to
be stored, but no project IDs have been created, the oven displays:
No Project Data
Do you want to
create a project?
f To return to the previous display without creating a project or
storing the sample data, press 〈NO〉 or 〈ESC〉.
To Next Page
Loading...
Need help?
General
