6–14
TARE
To tare, or “zero” the integrated scale manually, press 〈1〉 at the
Scale Menu.
NOTE
The operator can also tare the scale manually by
pressing the 〈TARE〉 key when the default screen is
displayed.
The oven tares the scale, displays a brief confirmation message, and
returns to the Scale Menu.
AUTO-TARE
The oven features an Auto-Tare function that, when enabled,
automatically tares the integrated scale approximately every 100 ms.
The Auto-Tare function is suspended when the chamber door is
open.
The Auto-Tare function is also suspended if the mass on the scale is
above a predetermined threshold (such as when loaded sample
baskets are placed in the oven). The Auto-Tare function resumes
when the difference between the current mass on the scale and the
last measured tared output is below the threshold.
To turn the Auto-Tare function on or off, press 〈2〉 at the Scale
Menu. The oven displays:
Auto-Tare
1. On
2. Off
Press 〈1〉 to turn the Auto-Tare function on; press 〈2〉 to turn the
function off. The oven displays a brief confirmation message and
returns to the Scale Menu.
To Next Page
Loading...
Need help?
General
