Troxler NTO 5–15
5. MAIN MENU
AUTO-TIMER
The Auto-Timer function can be used to automatically power the IR
element and exhaust fan on and off at specified times and on
specified days.
NOTE
When the Auto-Timer powers down the IR element and
exhaust fan, the control electronics remain powered.
NOTE
In the Auto-Timer mode, the oven will not turn off at the
programmed time if a burn cycle is in progress.
After the Auto-Timer has been enabled, the operator can disable or
suspend it as desired.
If the Auto-Timer is disabled, it will not turn the oven on or off. To
re-enable the Auto-Timer, the operator must re-enter all of the Auto-
Timer parameters (start and stop dates and times, and so on).
If the Auto-Timer is suspended, the oven retains all of the Auto-
Timer parameters. The Auto-Timer can then be re-enabled without
requiring the operator to re-enter this information.
The following sections describe how to enable, disable, and suspend
the Auto-Timer.
ENABLING THE AUTO-TIMER
To enable the Auto-Timer, press 〈2〉 at the MAIN MENU shown on
page 5–3. If the Auto-Timer is not already enabled, the
oven
requests the start date for the Auto-Timer as shown below. The start
date is the date on which the Auto-Timer is to begin controlling
power to the IR elem
ent.
mm/dd/yyyy
Input Start Date
then press ENTER
To Next Page
Loading...
Need help?
General
