Troxler NTO series User Manual

5–22
Use the up and down arrows to scroll through the various screens.
To return to the Status Menu, press 〈ESC〉.
NOTE
The system status display can also be viewed directly
from the default display by pressing the 〈STATUS〉 key.
To return to the default display, press 〈ESC〉.
PRINT STATUS
To print system status information to the internal printer, press 〈2〉 at
the Status Menu. While printing, the oven displays Printing
data please wait... When finished, the oven returns to the Status
Menu.
DOWNLOAD STATUS
To download the system status information from the oven, connect
the serial communications port to a computer or other serial device.
The serial communications port is the leftmost of the two serial
ports on the rear panel, as viewed from the rear of the oven.
NOTE
To ensure proper data transfer, the cable connected to
the serial communications port should not exceed 3 m
(10 ft) in length.
Check the baud rate as described on page 5–30. Press 〈3〉 at the
Status Men
u. While dow
nloading the system status information,
the oven displays Downloading data please wait... When
finished downloading, the oven returns to the Status Menu.

Troxler NTO series Specifications

General

Brand	Troxler
Model	NTO series
Category	Industrial Equipment
Language	English