Troxler NTO series User Manual

Appendix B–2
MENU MAP DESCRIPTION
Figure B–1 is a map of the MAIN MENU of the oven
control
software and each of its submenus. To access the MAIN MENU,
press 〈MENU〉. Where applicable, the default (as shipped) menu
settings are shown in shaded text.
The menu map uses indentation to indicate submenus that result
from selection of a menu item. For example, the first five lines of
Figure B-1 are:
MAIN MENU
1. Burn Setup
Burn Setup Menu
1. Burn Parameters
Burn Parameter Menu
This indicates that the first menu item under the MAIN MENU is
1. Burn Setup. Press 〈1〉 to access the Burn Setup Menu, a
submenu of the MAIN MENU.
Similarly, the first menu item under the Burn Setup Menu is
1. Burn Parameters. Press 〈1〉 to access the Burn
Parameter Menu, a submenu of the Burn Setup Menu.
NOTE
The menu map contains only the displays that allow or
require a keypad selection by the operator. Other
displays (such as status information, confirmation
messages, or error displays) are not included.

Troxler NTO series Specifications

General

Brand	Troxler
Model	NTO series
Category	Industrial Equipment
Language	English