6–10
CREATE ACF
To create a new ACF, press 〈2〉 at the Correction Menu shown on
page 6–8. If the maximum number (twenty) of ACFs already exists,
the oven displays an error
message. Press 〈ENTER〉 to return to the
Correction Menu. To clear space in memory for the new ACF,
use the Erase ACF function described on page 6–11.
If the maxi
mum nu
mber of ACFs does not already exist, the oven
displays:
¦ to scroll chars
YES to select char
ENTER when done
Enter the desired ACF ID. Use the numeric keys to enter numbers
and move the cursor to the next position. To enter alphabetic
characters, use the arrow keys to scroll through the characters.
When the desired character is displayed, press 〈YES〉 to move the
cursor to the next position. To move the cursor back one position,
press the 〈BACK SPACE〉 key.
NOTE
After the last character has been entered, press 〈YES〉 to
accept the character before pressing 〈ENTER〉 to accept
the ACF ID.
When the ACF ID is complete, press 〈ENTER〉. The oven then
requests the new ACF value:
Input new ACF value
from -5.00 to 5.00%
then press ENTER
To Next Page
Loading...
Need help?
General
