5–26
f To create a project, press 〈YES〉. The oven displays the screens
required to create a project as described in Chapter 7. When the
project ID is comp
lete, the oven sets the project as active,
displays a brief confirmation message, then requests the sample
number as described in the Active Project Selected section on
page 5–25.
NO PROJECT SELECTED
If the operator initiates the Store function and there is sample data to
be stored, but there is no active project (although project IDs have
been created), the oven displays:
Select
1. Scroll Projects
2. Enter Project ID
f To return to the previous display without selecting a project or
storing the sample data, press 〈ESC〉.
f To select a project, press 〈1〉 to scroll through the list of created
projects, or 〈2〉 to enter a known project ID. For more
information on selecting a project, refer to Chapter 7. After a
project ID has been select
ed
, the oven sets the project as active,
briefly displays a confirmation message, then requests the
sample number as described in the Active Project Selected
section on pa
ge 5–25.
To Next Page
Loading...
Need help?
General
