Troxler NTO 7–5
7. HANDLING DATA
CREATE
To create and activate a new project, press 〈2〉 at the Project Menu
shown on page 7–3. The oven displays:
¦ to scroll chars
YES to select char
ENTER when done
Enter a project ID using up to twelve alphanumeric characters. Use
the numeric keys to enter numbers and move the cursor to the next
position. To enter alphabetic characters, use the arrow keys to scroll
through the characters. When the desired character is displayed,
press 〈YES〉 to move the cursor to the next position. To move the
cursor back one position, press the 〈BACK SPACE〉 key.
NOTE
After the last character has been entered, press 〈YES〉 to
accept the character before pressing 〈ENTER〉 to accept
the project ID.
When the project ID is complete, press 〈ENTER〉. The oven sets the
entered project ID as active, briefly displays a confirmation
message, and returns to the Project Menu.
To Next Page
Loading...
Need help?
General
