7–4
f To activate a known project ID, press 〈2〉 at the Select display.
The oven displays:
¦ to scroll chars
YES to select char
ENTER when done
Enter a project ID using up to twelve alphanumeric characters.
Use the numeric keys to enter numbers and move the cursor to
the next position. To enter alphabetic characters, use the arrow
keys to scroll through the characters. When the desired
character is displayed, press 〈YES〉 to move the cursor to the
next position. To move the cursor back one position, press the
〈BACK SPACE〉 key.
NOTE
After the last character has been entered, press 〈YES〉 to
accept the character before pressing 〈ENTER〉 to accept
the project ID.
When the project ID is complete, press 〈ENTER〉. If the project
ID entered is not valid, the oven displays Requested Project
not found and returns to the Project Menu. If the project ID
entered is valid, the oven sets the project as active, displays a
brief confirmation message, and returns to the Project Menu.
To Next Page
Loading...
Need help?
General
