EasyManua.ls Logo

Troy-Bilt 1902 - User Manual

Troy-Bilt 1902
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual / Manual del Propietario
Manual No. 193904GS Revision 0 (09/18/2003)
Pressure Washer / Lavadora de Presión
Model / Modelo 01902
Printed in USA
Questions? Preguntas?
Helpline - 1-888-611-6708 M-F 8-5 CT
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON,WISCONSIN, U.S.A.
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
IMPORTANTE: LEYO LA SEGURIDAD LAS ORDENES Y LAS INSTRUCCIONES DETENIDAMENTE
Troy-Bilt® is a registered trademark of MTD and is used under license to Briggs & Stratton Power Products.
Troy-Bilt® es una marca registrada registrada de MTD y se usa abajo licencia a Briggs & Stratton Power Products.

Table of Contents

Questions and Answers

  • O
    osmithJul 26, 2025
    Why does my Troy-Bilt Pressure Washer have no pressure?
    • M
      marvin23Jul 26, 2025
      If your Troy-Bilt Pressure Washer pump fails to produce pressure, exhibits erratic pressure, chatters, loses pressure, or has low water volume, here's what you can do: * Ensure the nozzle is not in low pressure mode; pull it backward for high pressure. * Check for and clear any blockage in the water inlet. * Make sure the water supply is adequate. * Inspect the inlet hose for kinks or leaks; straighten the hose or patch any leaks. * Examine and clean the inlet hose strainer if it's clogged. * Ensure the water supply temperature is not over 100°F; use a cooler water supply. * Clear any blockages in the high pressure hose. * If the gun leaks, replace it. * Clean the nozzle if it's obstructed. * If the pump is faulty, contact an authorized service facility.
  • L
    Lisa MackAug 11, 2025
    How to fix detergent not mixing with spray on Troy-Bilt 1902?
    • J
      Jason BakerAug 11, 2025
      If the detergent fails to mix with the spray from your Troy-Bilt Pressure Washer, try these steps: 1. Ensure the detergent siphoning tube is fully submerged in the detergent. 2. Check the chemical filter for clogs or cracks; clean or replace the filter/detergent siphoning tube as needed. 3. Make sure the nozzle is in low pressure mode by pushing it forward.

Summary

Safety Rules

Safety Alert Symbol Explanation

Explains the purpose and usage of the safety alert symbol for potential hazards.

Hazard Symbols and Meanings

Illustrates and defines various hazard symbols used in the manual for safety.

DANGER and WARNING Statements

Details critical hazards requiring immediate attention and precautions.

CAUTION Statements

Outlines potential risks for equipment damage or minor injury.

Features and Controls

Assembly

Attach Handle

Add Engine Oil and Fuel

Connect Hose and Water Supply

Operation

How to Use Pressure Washer

Step-by-step guide for starting and operating the pressure washer.

How to Use Adjustable Nozzle

Applying Detergent

Instructions for using detergent with the pressure washer.

Maintenance

General Maintenance Recommendations

Overview of general maintenance practices and frequency.

Before Each Use Checks

Pump Maintenance

Procedures for maintaining the pressure washer pump, including oil changes.

Engine Maintenance

Reference to engine owner's manual for engine-specific maintenance.

Storage

Preparing the Unit for Storage

Protecting the Pump

Troubleshooting

Troubleshooting Guide

Common problems, their causes, and suggested corrections.

Troy-Bilt 1902 Specifications

General IconGeneral
BrandTroy-Bilt
Model1902
CategoryPressure Washer
LanguageEnglish

Related product manuals