To Next PageTo Next Page
Need help?Do you have a question about the Troy-Bilt 47330 and is the answer not in the manual?
General| Engine Displacement | 305cc |
|---|---|
| Chipper Hopper | Yes |
| Shredder Hopper | Yes |
| Number of Blades | 2 |
| Reduction Ratio | 10:1 |
| Horsepower | 10.5 hp |
| Engine | Briggs & Stratton |
| Chipping Capacity | 3 inches |
| Starting System | Recoil |
Unpacking procedures and checking for damage.
Verifying all parts are present and undamaged.
Instructions for attaching the chipper chute to the unit.
Guide for attaching the unit's handle.
Instructions for installing the clutch lever mechanism.
Overview of the main features and controls of the chipper/shredder.
Overview of the engine's control mechanisms.
Essential checks before starting the engine.
Information on checking and adding engine oil and gasoline.
Step-by-step guide for starting and stopping the machine.
Guidance on choosing between chipping and shredding methods.
Procedures for stopping the engine in an emergency.
Detailed instructions for using the chipper function.
Detailed instructions for using the shredder function.
Procedures for servicing and repairing the cylinder assembly.
Procedures for removing and installing the chipper blade.
General guidelines for engine maintenance.
Troubleshooting steps for an engine that fails to start.
Troubleshooting steps for an engine running inefficiently.
Troubleshooting steps for an overheating engine.
Troubleshooting steps when the shredder or chipper function fails.
Troubleshooting steps for poor shredding or chipping performance.
Troubleshooting steps for excessive vibration or noise.
Troubleshooting steps for a slipping drive belt.
