Troy-Bilt CSV206 User Manual

0 T-RnV BILT* - -
Operator's Manual
Chipper Shredder Vacuum
IMPORTANT: Read safety rules and instructions carefully
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131
Cleveland, Ohio 44136-0019.
TROY-BILTLLCP.O.BOX361131CLEVELAND,OHIO44136-0019
PRINTED IN U.S.A. FORM NO. 769-00170B
(11/2003)

Troy-Bilt CSV206 Specifications

General

Engine Type	Gasoline
Engine Displacement	206 cc
Reduction Ratio	10:1
Start Type	Recoil
Fuel Tank Capacity	0.8 gallons

Summary

Section 1: Important Safe Operation Practices

Training

Instructions for initial understanding and familiarization with the machine and its operation.

Preparation

Steps to take before operating the machine, including area inspection and personal protective equipment.

Maintenance & Storage

Guidelines for keeping the machine in good working condition and proper storage procedures.

Section 2: Assembling Your Chipper Shredder Vacuum

Attaching The Nozzle

Attaching the Chipper Chute

Attaching The Bag

Section 3: Know Your Chipper Shredder Vacuum

Stopping the Engine

Procedures for safely shutting down the machine's engine.

Section 4: Operating Your Chipper Shredder Vacuum

Gas & Oil Fill-Up

Instructions for servicing the engine with gasoline and oil according to the engine manual.

Starting Engine

Step-by-step guide on how to safely start the chipper shredder vacuum engine.

Using the Chipper Shredder Vacuum

Guidance on feeding material into the chipper chute and vacuuming yard waste.

Section 6: Maintaining Your Chipper Shredder Vacuum

Lubrication

Cleaning the Flail Screen

Procedure for removing and cleaning the flail screen when the discharge area is clogged.

Servicing the Blades

Instructions for removing, replacing, or sharpening the chipper blades.

Replacing the Belt

Storing Your Chipper Shredder Vacuum

Section 7: Troubleshooting

Manufacturer's Limited Warranty

Warranty Coverage Exclusions