Troy-Bilt 604 User Manual

OPERATOR’S MANUAL
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A. FORM NO. 770-10234A
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-cov-
ered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable
local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of
California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws.
Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer
or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.
(2/99)
Pedal Drive Lawn Tractor
Model 604

Troy-Bilt 604 Specifications

General

Engine	Briggs & Stratton
Engine Displacement	190cc
Drive System	Rear-Wheel Drive
Deck Material	Steel
Cutting Height Positions	6
Rear-wheel drive	Yes
Oil Capacity	20 oz
Engine Type	4-Cycle
Cutting Height	1.25 to 3.75 inches
Warranty	2-year limited
Start Type	Pull Start

Summary

Safety Information and Identification

General Operational Safety

Essential operating precautions, warnings, and general use guidelines.

Slope, Child, and Service Safety

Specific advice for slope operation, child safety, and service procedures.

Tractor Setup and Controls

Tractor Control Identification

Engine and Drivetrain Controls

Operating Procedures

Safety Interlock System Function

How safety interlocks prevent operation and ensure operator safety.

Engine Starting and Stopping

Step-by-step instructions for starting and stopping the engine.

Driving and Mowing Techniques

Slope Driving Guidelines

Safe operation practices when driving the tractor on inclines.

Adjustments

Cutting Deck Leveling

Seat, Steering, and Brake Adjustments

Maintenance

Engine and Deck Maintenance

Engine oil checks, air filter service, deck cleaning procedures.

Belt Replacement Procedures

Cutting Blade and Battery Care

Troubleshooting

Troubleshooting Engine Issues

Identifying and resolving common engine starting and running problems.

Troubleshooting Operational Issues