• Applyintermittentpressure(force,inshortpulses)
whilefeedinglarger(2-3-inchdiameter)branches
intothechipperchute,toavoidboggingorstalling
theengine.
IMPORTANT:Neverfeedbrancheswithadiameter
greaterthanthree(3)inchesintothechipperchute.
Doingsocanresultinseriousdamagetoyourunit's
chipperblades,flailsorimpeller.
NOTE: For best performance, always operate the unit
with sharp chipper blades. If a noticeable loss in
performance is encountered while chipping branches,
the chipper blades should be replaced.
EmptyingtheDebrisCollectionBag
• Stop engine.
• Squeeze the locking buckle release the bag's
drawstrap before loosening it from the chute
deflector. See Figure 6.
• Empty the bag and reattach to the chute deflector
opening. Refer to Figure 2.
Figure 6
Locking Buckle
SECTION5: MAINTAININGYOURCHIPPERSHREDDER
CustomerResponsibilities
MAINTENANCE
SCHEDULE
/IIIII
SERVICE
DATES
Lube Spring Latch
b Lube Chipper Chute Hinge
tm Lube Chute Deflector
o
inspect Chipper Blades
i?
inspect Shredder Blade ,:,_,,
inspect for Loose Hardware
Check Oil Level
Change Oil
UJ
Z Clean Air Filter Precleaner
©
_ Clean Engine
Check Spark Plug
WARNING: Always stop engine, disconnect
spark plug, and ground against engine before
cleaning, lubricating or doing any kind of
maintenance on your machine.
Lubrication
Chipper Chute Hinge: Lubricate the hinge a with light
oil once a season.
To Next Page
Loading...
Need help?
General