To Next Page
L
Lindsey RamirezNov 21, 2025
How to fix Troy-Bilt Chippers/Shredders engine that fails to start?
- SsantiagojoshuaNov 21, 2025
If your Troy-Bilt Chippers/Shredders engine fails to start, there are several potential causes: * The throttle lever might not be in the correct starting position. Move it to the FAST or START position. * The engine switch might be in the OFF position. Move it to the ON position. * The spark plug wire might be disconnected. Connect the wire to the spark plug. * The choke might not be in the CHOKE position. Move the choke lever to the CHOKE position. * The fuel tank might be empty or contain stale fuel. Fill the tank with clean, fresh gasoline. * The fuel shut-off valve might be closed. Turn it on. * The spark plug might be faulty. Clean, adjust the gap, or replace it. * The bag/chute switch button might not be fully depressed. Make certain the bag is correctly secured, and...
General
