Troy-Bilt TB200 User Manual

6 se c t i O n 2 — iM p O r t a n t sa f e Op e r a t i O n pr a c t i c e s
Notice Regarding Emissions
Engines which are certified to comply with California and federal

are certified to operate on regular unleaded gasoline, and
may include the following emission control systems: Engine

Injection (SAI) and Three Way Catalyst (TWC) if so equipped.
Spark Arrestor
This machine is equipped with an
internal combustion engine and should not be used
on or near any unimproved forest-covered, brush

exhaust system is equipped with a spark arrestor
meeting applicable local or state laws (if any).
If a spark arrestor is used, it should be maintained in effective
working order by the operator. In the State of California the


apply on federal lands.
A spark arrestor for the muffler is available through your
nearest engine authorized service dealer or contact the service


Troy-Bilt TB200 Specifications

General

Deck Material	Steel
Cutting Height Range	1.25 to 3.75 inches
Mulching Capability	Yes
Rear Bagging	Yes
Side Discharge	Yes
Engine Type	4-cycle
Starter Type	Recoil
Cutting Width	21 inches
Height Adjustment	Dual-lever
Wheel Size	7 in (front) / 8 in (rear)
Fuel Tank Capacity	1.3 quarts